logo

  • home



> Publication > Journal


2021 (0)2020 (5)2019 (3)2018 (4)2017 (6)
2016 (3)2015 (2)2014 (4)2013 (4)2012 (3)
2011 (3)2010 (2)2009 (4)2008 (6)2007 (2)
2006 (1)2005 (4)2004 (4)2003 (5)2002 (6)
2001 (6)2000 (1)1999 (1)1998 (0)1997이전 (2)
65 "Performance Prediction of Centrifugal Compressor for Drop-In Testing Using Low Greenhouse Warming Potential Alternative Refrigerants and Performance Test Codes"
Joo Hoon Park, Youhwan Shin, Jin Taek Chung
Energies, Vol. 10/12 (2017), pp. – SCIE , 2017
64 "Numerical studies on thermal hydraulic performance of zigzag-type printed circuit heat exchanger with inserted straight channels"
Seung Yeob Lee, Bo Guen Park, Jin Taek Chung
Applied Thermal Engineering, Vol. 123 (2017), pp. 1434-1443 – SCIE, 2017
63 "스플리터의 코드길이와 피치방향 위치가 천음속 원심압축기의 유동 특성에 미치는 영향에 대한 전산해석적 연구"
이병주, 김대현, 정진택
한국유체기계학회, 한국유체기계학회 논문집 19(5), 2016.10, pp. 5-11, 2016
62 "Heat Transfer and Secondary Flow with a Multicavity Gas Turbine Blade Tip"
Jung Shin Park, Sang Hoon Lee, Won Suk Lee, Jin Taek Chung, and Jae Su Kwak
Journal of Thermophysics and Heat Transfer, Vol. 30, No. 1 (2016), pp. 120-129, 2016
61 "Jet quality characteristics according to nozzle shape of energy-recovery Pelton turbines in pressure-retarded osmosis"
In Chan Jo, Joo Hoon Park, Jeong-Won Kim, Youhwan Shin, Jin Taek Chung
Desalination and Water Treatment , 2016
60 "PFI Dual Injection 엔진의 연료 분사각도와 분무각에 따른 엔진 내부 유동 및 연료 거동 특성"
이승엽, 정진택, 박영준, 유철호, 김우태
한국자동차공학회논문집, 2015
59 "“Effects of inlet velocity profile on flow and heat transfer in the entrance region of a ribbed channel"
Dae Hyun Kim , Byung Ju Lee , Jung Shin Park , Jae Su Kwak , Jin Taek Chung
International Journal of Heat and Mass Transfer, 2015
58 "CO2 hydrate formation at atmospheric pressure using high efficiency absorbent and surfactants"
Jae Woo Choi, Jin Tack Chung, Yong Tae Kang
Energy, 2014
57 "“The particle hydrodynamic effect on the mass transfer in a buoyant CO2-bubble through the experimental and computational studies”"
Won Suk Lee, Dae Hyun Kim, Jung Shin Park, Jae Su Kwak, Jin Taek Chung
Journal of Thermophysics and Heat Transfer, Vol. 28, No. 2, 2014
56 "Effect of Triangular Grooved Tip on Blade Tip Region Heat Transfer"
Won Suk Lee, Dae Hyun Kim, Jung Shin Park, Jae Su Kwak, Jin Taek Chung
Journal of Thermophysics and Heat Transfer, Vol. 28, No. 2, 2014
55 "MPI Dual Injection 엔진의 온도 조건 변화에 따른 엔진 내부 유동 및 연료 거동 특성에 관한 연구"
이승엽, 정진택, 박영준, 유철호, 김우태
한국자동차공학회논문집 제22권 제3호, 2014
54 "Effects of combustion parameters on reforming performance of a steam-methane reformer"
Jae Seong Lee, Juhyeong Seo, Ho Young Kim, Jin Taek Chung, Sam S. Yoon
Fuel 111, 461–471, 2013
53 "Effect of Inlet Velocity Profile on Heat Transfer in a Rotating Channel"
Eun Yeong Choi, Jung Shin Park, Dae Hyun Kim, Jin Taek Chung, Jae Su Kwak
Journal of Thermophysics and Heat Transfer Vol.27, No.1, 2013
52 "Heat transfer augmentation using a ribedimple compound cooling technique"
Eun Yeong Choi, Yong Duck Choi, Won Suk Lee, Jin Teak Chung, Jae Su Kwak
Applied Thermal Engineering 51, 2013
51 "허브 측 선단 수정에 따른 터빈 로터의 공력 특성에 대한 수치적 연구"
김대현, 이원석, 정진택
대한기계학회, 대한기계학회 논문집 A권, 제37권, 제7호, pp. 1007~1013, 2013
50 "Design and performance study of the ground-coupled heat pump system with an operating parameter"
Jin Taek Chung, Jong Min Choi
Renewable Energy, Vol. 42, pp. 118-124, 2012
 1  2  3  4  5  6